By using this website you consent to our use of these cookies.
Cobalt 2, data logger for temperature and other parameters
Wireless sensor data logger for temperature, humidity, CO2, differential pressure, 4-20mA, 0-5V, dry contact, and more







- Reduce the risk of degradation, therapeutic ineffectiveness, food waste, and financial loss.
- Help accelerate market release of products resulting from research.
- Ensure quality control for products and manage public health and sanitary risks.
- Optimize processes in manufacturing, packaging, storage, and delivery to patients and consumers
Cobalt 2 is a wireless sensor-based data logger for temperature and other parameters, to monitor your refrigerators, cold rooms, freezers and deep freezers (-80°C), incubators, Nitrogen tanks, blood banks, clean rooms, and much more…
- Multiple parameters
- Real-time alarms and alerts
- Accessible and secure data
- Network software architecture
- 21 CFR 11, EN 15189, HACCP, GMP, GLP
- IQ/OQ and validation documents
- Interface with third-party systems
How does Cobalt 2 work?
- Cobalt 2 modules are available with a variety of different sensors to cover all your monitoring needs.
- Cobalt 2 wireless temperature data loggers are easy to install and set up using the ThermoServer / ThermoClient software suite.
- Modules collect data at programmable intervals, storing it first internally and then uploading readings and other information wirelessly to your ThermoServer computer .
- Authorized users can access sensor readings at any time using the ThermoClient application for Windows.
- Data can also be made available on smartphones and tablets by synchronizing with the OCEACloud platform (optional).
- In case of excursions or technical issues, alerts are sent 24/7 via OCEASOFT’s robust alert platform by e-mail, SMS/text message, or voice message.
- Over 150,000 data loggers deployed globally
- Helps you stay in compliance with the strictest regulatory requirements: FDA 21 CFR Part 11, IQ/OQ, Validation, HACCP, Hygiene Pack, GMP, EN 15189, SOP
- Multiple parameters: temperature, humidity, CO2, differential pressure, dry contact, 4-20mA, and 0-5V
- Robust, simple and effective monitoring for your sensitive products
- Real-time alarms and alerts by e-mail, SMS/text message, or voice call
- Secure data, accessible and auditable
- Interface with third-party information systems via OPC connector
- Data logger compliant with the EN 15189 standard and developed in accordance with FDA 21 CFR Part 11 guidelines
- High visibility LCD
- Temperature ranges: 0°C to +50°C with internal sensor, -200°C to +350°C with external sensor (depending on probe type)
- Other parameters monitored: relative humidity (0% to 99.9% RH), CO2, differential pressure, dry contact, 4-20 mA and 0-5V
- Wireless connectivity up to 700 m (appr. 2,300 ft.) line-of-sight, depending on the environment (site study recommended)
- Unlimited storage of readings on OCEACloud, with internal module memory for 3,000 readings (1,500 + 1,500 on dual sensor modules)
- Industrial, Scientific, and Medical (ISM) frequency bands with 4 international options: 915 MHz (US/CAN), 868 MHz (Europe), 434 MHZ (Asia/Pacific), 867 MHz (India/Asia)
- Data viewing with ThermoClient Mobile application (optional)
- Reports generated in Microsoft Excel compatible and PDF formats
- Temperatures displayed in °C or °F
- Configurable read interval from 4 minutes to 4 hours, and continuous monitoring
- Alarm status displayed on module LCD, automatic alert transmission by ThermoServer and OCEAlert
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- Dimensions: 132.7 x 34 x 64.2 mm (3.2 x 1.4 x 0.3 in.) Weight: 150 g (5.3 oz.) Protection index: IP65 (IP67 with external case) ABS plastic casing
- Compact module
- Direct digital processing using Cobalt 2 integrated signal processor
- Temperature range from 0°C to +50°C
- Sensor calibration by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- Monitoring temperature in refrigerators, cold rooms, freezers, autoclaves, incubators: single or dual sensor modules from -40°C to +80°C
- Monitoring temperature for extended ranges in ovens, incubators, and water-baths: waterproof single or dual sensor modules from -40°C to +120°C
- Monitoring with a contact sensor (typically used to monitor water pipes for legionella): single or dual sensor monitor from -40°C to +80°C
- Monitoring temperature in food products: insertion probe from -40°C to +120°C
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- -100°C to +150°C for ultra-low temperature freezers (precision version available with 4 wires)
- -200°C to +50°C for liquid nitrogen tanks and cryogenic freezers
- +100°C to +350°C for autoclaves, incubators, and ovens
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- 4-wire connector
- Temperature range from -40°C to +100°C (resolution 0.0625°C)
- Relative humidity range from 0% to 99.9% non-condensing (resolution 0.025°% RH)
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- CO2 range: 0% to 9.99%
- (resolution 0.0625% )
- Temperature range from 0°C to +50°C (resolution 0.0625°C)
- Specific module: 79.5 x 76.5 x 45.5 mm (3 x 3 x 1.7 in.) – IP 44 – ABS casing with PTFE filter
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- Differential pressure range: -500 Pa to + 500 Pa (resolution 0.0625 Pa)
- Complete compatibility: air, nitrogen; partial compatibility: O2
- Supported overpressure: 1 bar
- Sensor calibration by accredited OCEASOFT laboratory (OCEASOFT-certified calibration only )
- Internal sensor with 4-20 mA or 0-5V input
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited or OCEASOFT-certified
- NIST-traceable calibration available for 4-20 mA module only.
- Dry contact input sensor On/Off
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable
- 3 internal sensors: temperature (-30°C to +50°C, resolution 0.0625°C); relative humidity (0% to 90%, resolution 0.25% RH), and light (day/night cycles)
- 3 external sensors: temperature (-40°C to +100°C, resolution 0.0625°C); relative humidity (0% to 90%, resolution 0.25% RH), and light (day/night cycles)
- Specific module: 86 x 64 x 29.6 mm (3.4 x 2.5 x 1.2 in.) – IP 65
- Sensor calibration options by OCEASOFT laboratory: ISO/IEC 17025 (COFRAC) accredited, OCEASOFT certified, or NIST traceable

Internal temperature sensor
Wireless temperature data logger with internal sensor for monitoring ambient temperature.

External sensors
Wireless temperature data logger with external temperature sensors / Temperature ranges for specific application needs:

Pt100 temperature sensor
Cobalt 2 modules may be equipped with a Pt100 temperature sensor. Also referred to as RTDs (Resistance Temperature Detectors), Pt100 sensors measure extreme temperatures. 3 types of Pt100 temperature sensors are available, depending on the application (3 wires, Class B, resolution 0.07°C):

Temperature and humidity data logger
Temperature and humidity data logger for simultaneously tracking relative humidity and temperature. Generally used for tracking storage conditions in medical and agri-food environments.

CO2 and temperature sensor
Dual-function temperature and CO2 data logger for monitoring both CO2 concentration and temperature. Generally used for measuring CO2 levels in incubators. With its broad base providing increased stability, the sensor is placed inside your incubator and connected via ribbon cable to the Cobalt 2 module, which is placed on the outside of the incubator.

Differential pressure sensor
Differential pressure data logger for measuring the relative pressure between two zones, one of which is considered the reference. The module is generally placed in the space where ambient pressure is considered as “normal”, and the tube on one of the module inputs measures the positive or negative pressure difference in another space. This enables you to monitor overpressure or underpressure conditions. The differential pressure sensor is particularly adapted for monitoring “clean” and “dirty” zones in laboratories.

Active output sensor (4-20 mA or 0-5 V)
This module connects with all industry-standard equipment that generates an active output current of 4-20 mA or 0-5V. Current is measured and interpreted to provide information for various applications, such as monitoring wind speed, position angles, particle counters, fill-levels, etc.

Dry contact input sensor
This module connects with standard industry devices that are equipped with a dry contact output. The Cobalt 2 dry contact module emits a low electrical current to detect whether the switch in the other device is open or closed.

Temperature, light, and humidity sensors – Cobalt T
Equipped with several sensors, the Cobalt T module monitors ambient temperature, relative humidity, and day/night light cycles. In compliance with directive 2010/63/UE, elaborated by the European Union regarding the protection of animals in scientific contexts, Cobalt T is designed to monitor ambient conditions in animal facilities and research laboratories.